Getting into it now

The stripdown continues:

Today, we have achieved the following…

  • Rear wiring disconnected
  • Mains wiring removed/ disconnected
  • Towbar mostly off – two bolts still to cut off
  • Water filler disconnected
  • Rear crossmember bolts mostly off – some bolts too rusty
  • Rad and intercooler removed
  • Preheater removed
  • Electric fan removed
  • disconnected horn
  • heater disconnected from engine
  • PAS reservoir and fuel filter unbracketed from body
  • Front axle breather cleared from bulkhead
  • Front slam panel body mounts removed
  • Started disconnecting wiring multiplugs at bulkhead